鋼結構廠房地腳螺栓的埋置方法
- 文件介紹：
- 該文件為 doc 格式，下載需要 5 積分
- 鋼結構廠房地腳螺栓的埋置方法地腳螺栓的埋置是鋼結構廠房施工的一大關鍵，直接影響到上部鋼結構廠房的垂直度，方正度。若地腳螺栓的埋置偏差過大，則會對后期的上部施工中的結構螺栓，檁條螺栓，圍梁螺栓的連接等造成很大的困難。在施工過程中，我們要著重控制地腳螺栓的平面位置，垂直度及螺栓釘標高，以盡可能減少上述誤差。
For direct influence on the perpendicularity and square, the embedding of anchor bolts is one of the most important points during the construction of steel structure building. There would be great difficulties in working on structural bolts, purline bolts, and girt bolts if there is any declination in embedding the anchor bolts. During construction, the great emphasis should be placed on the horizontal position, prependicularity and elevation of bolts in order to reduce such declination to the least..
要求：平面位置誤差：＋3mm，螺栓頂標高誤差：＋3mm
Basic requirements:
Horizontal position declination: 3mm
Anchor bolts top elevation declination: 3mm
§1 須配備的設備，工具及施工人員：
Working staff, Necessary equipment and Tools:
1.1 設備及工具：
Equipment and tools:
光學水準儀及腳架，標尺
...
熱門關鍵詞： 
