熱門關鍵詞：
數控車床四工位回轉刀架機電設計
  • 該文件為doc格式
  • 文件大小：324.61K
  • 下載次數：
  • 文件評級：
  • 更新時間：2013-01-04
  • 發 布 人：like1654
  • 文件下載：

  • 立即下載

  • 文件介紹：
  • 該文件為 doc 格式，下載需要 5 積分
  • 自動回轉刀架CNC lathe work order to be able to complete a fixture in many processes processing aids to reduce time, reduce installation time and again caused by processing errors, we must turn with automatic tool. Installed in accordance with the number of different knives, automatic revolving turret at position four of six and eight-station work spaces and other forms. According to the different installation methods, automatic rotary tool can be divided into two types of vertical and horizontal. Positioning means according to the different mechanical, automatic rotary tool set can be divided into client positioning tooth and three teeth, such as disk-based positioning. The interruption of tooth plate-type tool change position to be lifted when the tool carrier, tool change a slow and poor sealing, but its relatively simple structure. Tridentate known disk-based location-free lift-type, characterized by ATC when the tool is not lifted, so when the tool change is fast and good seal, but its more complicate
    structure.
    Automatic rotary tool in the structure must have good strength and rigidity to bear the rough at the time of cutting resistance. In order to ensure a high transposition of the repeat positioning accuracy, automatic rotary tool holder of the position would also like to choose a reliable and reasonable positioning program structure. Rotary Tool Automatic Tool Changer automatically by the control system and the drive circuit to achieve.
    Keywords: automatic rotary tool, vice worm, Electromechanical system


















    目 錄
    第1章 緒論 2
    1.1 課題綜述 2
    1.1.1 科學意義和應用前景 2
    1.1. 2 設計思路 3
    第2章總體結構設計 4
    1.1減速傳動機構的設計 4
    1.2 上刀體鎖緊與精定位機構的設計 4
    1.3 刀架抬起機構的設計 4
    第3章自動回轉刀架的工作原理 5
    第4章 主要傳動部件的設計計算 8
    1.1 蝸桿副的設計計算 8
    1.2 螺桿的設計計算 12
    第5章 電氣控制部分設計 13
    1.1 硬件電路設計 13
    1.2 控制軟件設計 15
    致 謝 17
    參考文獻 18
    ...
文檔留言
驗證碼: 請在右側輸入驗證碼 看不清楚,換一個