熱門關鍵詞：
工藝夾具類畢業設計課程設計目錄 CA6140杠桿加工工藝及夾具設計
  • 該文件為doc格式
  • 文件大小：28.16K
  • 下載次數：
  • 文件評級：
  • 更新時間：2012-09-13
  • 發 布 人：liwefe
  • 文件下載：

  • 立即下載

  • 文件介紹：
  • 該文件為 doc 格式，下載需要 10 積分
  • 工藝夾具類畢業設計課程設計目錄 CA6140杠桿加工工藝及夾具設計本設計是CA6140杠桿零件的加工工藝規程及一些工序的專用夾具設計。CA6140杠桿零件的主要加工表面是平面及孔。一般來說，保證平面的加工精度要比保證孔的加工精度容易。因此，本設計遵循先面后孔的原則。并將孔與平面的加工明確劃分成粗加工和精加工階段以保證孔的加工精度。基準的選擇以杠桿 外圓面作為粗基準，以 孔及其下表面作為精基準。先將底面加工出來，然后作為定位基準，在以底面作為精基準加工孔。整個加工過程選用組合機床。在夾具方面選用專用夾具�？紤]到零件的結構尺寸簡單，夾緊方式多采用手動夾緊，夾緊簡單，機構設計簡單，且能滿足設計要求。
    關鍵詞 杠桿零件，加工工藝，夾具，定位，夾緊
    ABSTRACT
    This paper is to design the craft processes of making the CA6140 lever spare parts and some specialized tongs in the process. The CA6140 lever spare part primarily processes the surface and bores. Generally speaking, to guarantee the accuracy of the flat surface process is easier than that of the bore. Therefore, this design follows the principle that surface first and then the bore, and definitely divides the process of flat surface and bore into coarse processes and precise processes to guarantee the bore processes. The basic choice is to consider 45 outside circle as rough basis and to consider 25 bore and its next surface as precise basis. The bottom is first processed out to be fixed position basis, and process the bore using the bottom as the precise basis. The whole processes choose the machine bed. In the aspects of tongs choosing, specialized tongs are used. In consideration of the simple construction size of the spare parts, clipping by hands is adopted. It is simple, and the organization design is simple, and can satisfy the design request.
    Key Words Lever spare parts, craft proces , tongs, fixed position, tight clip
    摘 要 Ⅰ
    ABSTRSCT Ⅱ
    1 緒論 1
    1.1課題背景及發展趨勢 1
    ...
文檔留言
驗證碼: 請?jiān)谟覀?cè)輸入驗證碼 看不清楚,換一個